A3064LKA | ||||||||
A3064LKA ManufacturerA3064LKA DescriptionA3064LKA CategoriesA3064LKA Datasheet (PDF)A3064LKA Price & AvailabilityA3064LKA Features
A3064LKA DescriptionThe A3064LKA ac-coupled Hall-effect gear-tooth sensor is a monolithic integrated circuit that switches in response to changing differential magnetic fields created by moving ferrous targets. This device is ideal for use in non-zero-speed, gear-tooth-based speed, position, and timing applications such as in anti-lock braking systems, transmissions, and crankshafts. When coupled with a back-biasing magnet, the sensor can be configured to turn on or off with the leading or trailing edge of a gear-tooth or slot. Changes in fields on the magnet face caused by a moving ferrous mass are sensed by two integrated Hall transducers and are differentially amplified by on-chip electronics. This differential sensing design provides immunity to radial vibration within the device's operating air gap. Steady-state magnet and system offsets are eliminated using an on-chip differential band-pass filter. This filter also provides relative immunity to interference from RF and electro-magnetic sources. The on-chip temperature compensation and Schmitt trigger circuitry minimizes shifts in effective working air gaps and switch points over temperature, allowing operation to low frequencies over a wide range of air gaps and temperatures. Each Hall-effect digital Integrated circuit includes a voltage regulator, two quadratic Hall-effect sensing elements, temperature compensating circuitry, a low-level amplifier, band-pass filter, Schmitt trigger, and an open-collector output driver. The on-board regulator permits operation with supply voltages of 4.5 to 24 volts. The output stage can easily switch 20 mA over the full frequency response range of the sensor and is compatible with bipolar and MOS logic circuits. A3064LKA ParametersKeywords
|