A3260ELT

A3260ELT Manufacturer

A3260ELT Description

A3260ELT Categories

A3260ELT Datasheet (PDF)

A3260ELT Price & Availability

A3260ELT Features

• Internal Current Regulator for 2-Wire Operation
• Output Slew Rate Controlled
• Resistant to Physical Stress
• Superior Temperature Stability
• Operation From Unregulated Supply
• Reverse Battery Protection
• Solid-State Reliability
• Small Size

A3260ELT Description

The A3260- Hall-effect bipolar switch is an extremely temperature-stable and stress-resistant sensor especially suited for operation over extended temperature ranges to +150°C. Superior high-temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.

The device includes on a single silicon chip a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and a constant-current open-collector output. A south pole of sufficient strength will turn the output OFF. An on-board regulator permits operation with supply voltages of 3.5 to 24 volts. Noise radiation is limited by control of the output current slew rate.

A3260ELT Parameters

Products Similar to A3260ELT