CY62147CV30LL-70BAI

CY62147CV30LL-70BAI Manufacturer

CY62147CV30LL-70BAI Description

CY62147CV30LL-70BAI Datasheet (PDF)

CY62147CV30LL-70BAI Price & Availability

CY62147CV30LL-70BAI Features

• High Speed
• • 55 ns and 70 ns availability
• Voltage range:
• • CY62147CV25: 2.2V?2.7V
  • CY62147CV30: 2.7V?3.3V
  • CY62147CV33: 3.0V?3.6V
• Pin Compatible with CY62147V
• Ultra-low active power
• • Typical active current: 1.5 mA @ f = 1 MHz
  • Typical active current: 5.5 mA @ f = f_max (70 ns speed)
• Low standby power
• Easy memory expansion with CE and OE features
• Automatic power-down when deselected
• CMOS for optimum speed/power

CY62147CV30LL-70BAI Description

The CY62147CV25/30/33 are high-performance CMOS static RAMs organized as 256K words by 16 bits. These devices feature advanced circuit design to provide ultra-low active current. This is ideal for providing More Battery Life? (MoBL?) in portable applications such as cellular telephones. The devices also have an automatic power-down feature that significantly reduces power consumption by 80% when addresses are not toggling. The device can also be put into standby mode reducing power consumption by more than 99% when deselected (CE HIGH or both BLE and BHE are HIGH). The input/output pins (I/O₀ through I/O₁₅) are placed in a high-impedance state when: deselected (CE HIGH), outputs are disabled (OE HIGH), both Byte High Enable and Byte Low Enable are disabled (BHE, BLE HIGH), or during a write operation (CE LOW and WE LOW).

Writing to the device is accomplished by taking Chip Enable (CE) and Write Enable (WE) inputs LOW. If Byte Low Enable (BLE) is LOW, then data from I/O pins (I/O₀ through I/O₇), is written into the location specified on the address pins (A₀ through A₁₇). If Byte High Enable (BHE) is LOW, then data from I/O pins (I/O₈ through I/O₁₅) is written into the location specified on the address pins (A₀ through A₁₇).

Reading from the device is accomplished by taking Chip Enable (CE) and Output Enable (OE) LOW while forcing the Write Enable (WE) HIGH. If Byte Low Enable (BLE) is LOW, then data from the memory location specified by the address pins will appear on I/O₀ to I/O₇. If Byte High Enable (BHE) is LOW, then data from memory will appear on I/O₈ to I/O₁₅. See the truth table at the back of this data sheet for a complete description of read and write modes.

The CY62147CV25/30/33 are available in a 48-ball FBGA package.

CY62147CV30LL-70BAI Parameters

Products Similar to CY62147CV30LL-70BAI