Catalog Categories Part Numbers Manufacturers Search

CY7C1011CV33-10ZC

CY7C1011CV33-10ZC Manufacturer

Cypress

CY7C1011CV33-10ZC Description

128K x 16 Static RAM

CY7C1011CV33-10ZC Categories

128Kx16 SRAM

CY7C1011CV33-10ZC Datasheet (PDF)

CY7C1011CV33-10ZC Datasheet

CY7C1011CV33-10ZC Price & Availability


Check CY7C1011CV33-10ZC Price & Availability at Canics

CY7C1011CV33-10ZC Features

  • Pin equivalent to CY7C1011BV33
  • High speed
    • tAA = 10 ns
  • Low active power
    • 360 mW (max.)
  • Data Retention at 2.0
  • Automatic power-down when deselected
  • Independent control of upper and lower bits
  • Easy memory expansion with /CE and /OE features
  • Available in 44-pin TSOP II, 44-pin TQFP, and 48-ball VFBGA

CY7C1011CV33-10ZC Description

    The CY7C1011CV33 is a high-performance CMOS Static RAM organized as 131,072 words by 16 bits.

    Writing to the device is accomplished by taking Chip Enable (/CE) and Write Enable (/WE) inputs LOW. If Byte Low Enable (/BLE) is LOW, then data from I/O pins (I/O0 through I/O7), is written into the location specified on the address pins (A0 through A16). If Byte High Enable (/BHE) is LOW, then data from I/O pins (I/O8 through I/O15) is written into the location specified on the address pins (A0 through A16).

    Reading from the device is accomplished by taking Chip Enable (/CE) and Output Enable (/OE) LOW while forcing the Write Enable (/WE) HIGH. If Byte Low Enable (/BLE) is LOW, then data from the memory location specified by the address pins will appear on I/O0 to I/O7. If Byte High Enable (/BHE) is LOW, then data from memory will appear on I/O8 to I/O15. See the truth table at the back of this data sheet for a complete description of read and write modes.

    The input/output pins (I/O0 through I/O15) are placed in a high-impedance state when the device is deselected (/CE HIGH), the outputs are disabled (/OE HIGH), the /BHE and /BLE are disabled (/BHE, /BLE HIGH), or during a write operation (/CE LOW, and /WE LOW).

    The CY7C1011CV33 is available in a standard 44-pin TSOP II package with center power and ground pinout, a 44-pin Thin Plastic Quad Flatpack (TQFP), as well as a 48-ball fine-pitch ball grid array (VFBGA) package.

    CY7C1011CV33-10ZC Parameters

    Vcc (V)3.3
    Density2MB
    Organization128Kb x16
    100-999 qty $6.65
    Select parameters and click to see components with these parameters.

    Products Similar to CY7C1011CV33-10ZC

    CY7C1011CV33, CY7C1011CV33-10BVC, CY7C1011CV33-10BVI, CY7C1011CV33-10ZI, CY7C1011CV33-12AC

     
    Keywords
    CY7C1011CV33-10ZC Data Sheet CY7C1011CV33-10ZC Spec CY7C1011CV33-10ZC Application Notes CY7C1011CV33-10ZC Distributor
    CY7C1011CV33-10ZC Circuit CY7C1011CV33-10ZC Reference CY7C1011CV33-10ZC PDF CY7C1011CV33-10ZC RoHS