CY7C1352F-133AC

CY7C1352F-133AC Manufacturer

CY7C1352F-133AC Description

CY7C1352F-133AC Description

CY7C1352F-133AC Datasheet (PDF)

CY7C1352F-133AC Price & Availability

CY7C1352F-133AC Features

• Pin-compatible and functionally equivalent to ZBT? devices
• Internally self-timed output buffer control to eliminate the need to use /OE
• Byte Write capability
• 256K x 18 common I/O architecture
• Single 3.3V power supply
• 2.5V/3.3V I/O operation
• Fast clock-to-output times
  • 2.6 ns (for 250-MHz device)
  • 2.6 ns (for 225-MHz device)
  • 2.8 ns (for 200-MHz device)
  • 3.5 ns (for 166-MHz device)
  • 4.0 ns (for 133-MHz device)
  • 4.5 ns (for 100-MHz device)
• Clock Enable (/CEN) pin to suspend operation
• Synchronous self-timed writes
• Asynchronous output enable (/OE)
• JEDEC-standard 100 TQFP package
• Burst Capability?linear or interleaved burst order
• ?ZZ? Sleep Mode Option and Stop Clock option

CY7C1352F-133AC Description

The CY7C1352F is a 3.3V, 256K x 18 synchronous-pipelined Burst SRAM designed specifically to support unlimited true back-to-back Read/Write operations without the insertion of wait states. The CY7C1352F is equipped with the advanced No Bus Latency? (NoBL?) logic required to enable consecutive Read/Write operations with data being transferred on every clock cycle. This feature dramatically improves the throughput of the SRAM, especially in systems that require frequent Write/Read transitions.

All synchronous inputs pass through input registers controlled by the rising edge of the clock. All data outputs pass through output registers controlled by the rising edge of the clock. The clock input is qualified by the Clock Enable (/CEN) signal, which, when deasserted, suspends operation and extends the previous clock cycle. Maximum access delay from the clock rise is 2.8 ns (200-MHz device).

Write operations are controlled by the two Byte Write Select (/BW[A:B]) and a Write Enable (/WE) input. All writes are conducted with on-chip synchronous self-timed write circuitry.

Three synchronous Chip Enables (/CE1, CE2, /CE3) and an asynchronous Output Enable (/OE) provide for easy bank selection and output three-state control. In order to avoid bus contention, the output drivers are synchronously three-stated during the data portion of a write sequence.

CY7C1352F-133AC Parameters

Products Similar to CY7C1352F-133AC