CY7C4261V-15JC

CY7C4261V-15JC Description

CY7C4261V-15JC Manufacturer

CY7C4261V-15JC Datasheet (PDF)

CY7C4261V-15JC Price & Availability

CY7C4261V-15JC Features

• 3.3V operation for low power consumption and easy integration into low-voltage systems
• High-speed, low-power, first-in first-out (FIFO) memories
• 16K × 9 (CY7C4261V)
• 32K × 9 (CY7C4271V)
• 64K × 9 (CY7C4281V)
• 128K × 9 (CY7C4291V)
• 0.35-micron CMOS for optimum speed/power
• High-speed 100-MHz operation (10-ns read/write cycle times)
• Low power
  • I_CC = 25 mA
  • I_SB = 4 mA
• Fully asynchronous and simultaneous read and write operation
• Empty, Full, and programmable Almost Empty and Almost Full status flags
• Output Enable (/OE) pin
• Independent read and write enable pins
• Supports free-running 50% duty cycle clock inputs
• Width- Expansion capability
• 32-pin PLCC
• Pin-compatible density upgrade to CY7C42X1V family
• Pin-compatible 3.3V solutions for CY7C4261/71/81/91

CY7C4261V-15JC Description

The CY7C4261/71/81/91V are high-speed, low-power FIFO memories with clocked read and write interfaces. All are nine bits wide. The CY7C4261/71/81/91V are pin-compatible to the CY7C42x1V Synchronous FIFO family. Programmable features include Almost Full/Almost Empty flags. These FIFOs provide solutions for a wide variety of data buffering needs, including high-speed data acquisition, multiprocessor inter­faces, and communications buffering.

These FIFOs have 9-bit input and output ports that are controlled by separate clock and enable signals. The input port is controlled by a free-running clock (WCLK) and two write-enable pins (/WEN1, WEN2//LD).

When /WEN1 is LOW and WEN2//LD is HIGH, data is written into the FIFO on the rising edge of the WCLK signal. While /WEN1 and WEN2//LD are held active, data is continually written into the FIFO on each WCLK cycle. The output port is controlled in a similar manner by a free-running read clock (RCLK) and two read enable pins (/REN1, /REN2). In addition, the CY7C4261/71/81/91V has an output enable pin (/OE). The read (RCLK) and write (WCLK) clocks may be tied together for single-clock operation or the two clocks may be run indepen­dently for asynchronous read/write applications. Clock frequencies up to 100 MHz are achievable. Depth expansion is possible using one enable input for system control, while the other enable is controlled by expansion logic to direct the flow of data.

CY7C4261V-15JC Parameters

Products Similar to CY7C4261V-15JC