CY7C64113

CY7C64113 Manufacturer

CY7C64113 Description

CY7C64113 Categories

CY7C64113 Price & Availability

CY7C64113 Features

• Full-speed USB Microcontroller
• 8-bit USB Optimized Microcontroller
  • Harvard architecture
  • 6-MHz external clock source
  • 12-MHz internal CPU clock
  • 48-MHz internal clock
• Internal memory
  • 256 bytes of RAM
  • 8 KB of PROM (CY7C64013, CY7C64113)
• Integrated Master/Slave I2C-compatible Controller (100 kHz) enabled through General-Purpose I/O (GPIO) pins
• Hardware Assisted Parallel Interface (HAPI) for data transfer to external devices
• I/O ports
  • Three GPIO ports (Port 0 to 2) capable of sinking 7 mA per pin (typical)
  • An additional GPIO port (Port 3) capable of sinking 12 mA per pin (typical) for high current requirements: LEDs
  • Higher current drive achievable by connecting multiple GPIO pins together to drive a common output
  • Each GPIO port can be configured as inputs with internal pull-ups or open drain outputs or traditional CMOS outputs
  • A Digital to Analog Conversion (DAC) port with programmable current sink outputs is available on the CY7C64113 devices
  • Maskable interrupts on all I/O pins
• 12-bit free-running timer with one microsecond clock ticks
• Watchdog Timer (WDT)
• Internal Power-On Reset (POR)
• USB Specification Compliance
  • Conforms to USB Specification, Version 1.1
  • Conforms to USB HID Specification, Version 1.1
  • Supports up to five user configured endpoints
• Up to four 8-byte data endpoints
• Up to two 32-byte data endpoints
  • Integrated USB transceivers
• Improved output drivers to reduce EMI
• Operating voltage from 4.0V to 5.5V DC
• Operating temperature from 0 to 70 degrees Celsius
• CY7C64013 available in 28-pin SOIC and 28-pin PDIP packages
  • CY7C64113 available in 48-pin SSOP packages
• Industry-standard programmer support

CY7C64113 Description

The CY7C64013 and CY7C64113 are 8-bit One Time Programmable microcontrollers that are designed for full-speed USB applications. The instruction set has been optimized specifically for USB operations, although the microcontrollers can be used for a variety of non-USB embedded applications.