SL811HST-AC

SL811HST-AC Description

The only USB Host/Slave controller for embedded system in the market with a standard microprocessor bus interface.
Supports both full-speed (12 Mbps) and low-speed (1.5 Mbps) USB transferOperates as a Single USB Host, or Slave under Software control
Low Speed 1.5 Mbps, and Full Speed 12 Mbps, in both Master and Slave modes
Automatic Detection of either Low/Full speed devices
8-bit Bidirectional Data, port I/O (DMA supported in slave mode)
On-Chip SIE and USB transceivers
On-Chip Single Root HUB support
256 bytes Internal SRAM buffer, Ping-Pong operation
Operates from 12 MHz or 48 MHz crystal or oscillator (Built-in DPLL)
5 V tolerant Interface
Suspend/resume, wake up and low power modes are supported
Auto Generation of SOF, and CRC5/16
Auto Address increment mode, saves memory READ/Write Cycles
Development kit including source code drivers is available
Backward compatible with SL11H, both pin and functionality
3.3V power source, 0.35 micron CMOS Technology
Available in either a 28-Pin PLCC (SL811HS) or 48-Pin TQFP (SL811HST-AC) package

SL811HST-AC Data Sheet	SL811HST-AC Spec	SL811HST-AC Application Notes	SL811HST-AC Distributor
SL811HST-AC Circuit	SL811HST-AC Reference	SL811HST-AC PDF	SL811HST-AC RoHS