ML4800IS DescriptionML4800IS DescriptionML4800IS CategoriesML4800IS Manufacturer
ML4800IS Datasheet (PDF)
ML4800IS Price & Availability
ML4800IS Features- Internally synchronized leading-edge PFC and trailing-edge PWM in one IC
- TriFault Detect? for UL1950 compliance and enhanced safety
- Slew rate enhanced transconductance error amplifier for ultra-fast PFC response
- Low power: 200ľA startup current, 5.5mA operating current
- Low total harmonic distortion, high PF
- Reduced ripple current in storage capacitor between PFC and PWM sections
- Average current, continuous boost leading edge PFC
- PWM configurable for current-mode or voltage mode operation
- Current fed gain modulator for improved noise immunity
- Overvoltage and brown-out protection, UVLO, and soft start
ML4800IS DescriptionThe ML4800 is a controller for power factor corrected, switched mode power supplies. Power Factor Correction (PFC) allows the use of smaller, lower cost bulk capacitors, reduces power line loading and stress on the switching FETs, and results in a power supply that fully complies with IEC1000-3-2 specification. Intended as a BiCMOS version of the industry-standard ML4824, the ML4800 includes circuits for the implementation of leading edge, average current, "boost" type power factor correction and a trailing edge, pulse width modulator (PWM). It also includes a TriFault Detec? function to help ensure that no unsafe conditions will result from single component failure in the PFC. Gate-drivers with 1A capabilities minimize the need for external driver circuits. Low power requirements improve efficiency and reduce component costs. ML4800IS Parameters
Products Similar to ML4800IS
Other Components
42J200E
TPD2S017
HZ15CP
D3899926MJ8SN
BFC2 370 51393
Keywords
| ML4800IS Data Sheet |
ML4800IS Spec |
ML4800IS Application Notes |
ML4800IS Distributor |
| ML4800IS Circuit |
ML4800IS Reference |
ML4800IS PDF |
ML4800IS RoHS |
|