| NC7WB66L8X Description |
| TinyLogic Low Voltage UHS Dual SPST Normally Open Analog Switch or 2-Bit Bus Switch |
| NC7WB66L8X Vendor |
| Fairchild Semiconductor |
| NC7WB66L8X Features |
- Useful in both analog and digital applications
- Space saving US8 surface mount package
- MicroPak™ Pb-Free leadless package
- Typical 7ohm On Resistance @ 5V VCC
- Broad VCC operating range: 1.65V to 5.5V
- Rail-to-Rail signal handling
- Power down high impedance control inputs
- Control inputs are overvoltage tolerant
- Control inputs are CMOS compatible
- >300 MHz -3dB bandwidth
|
| NC7WB66L8X Description |
The FSA266 or NC7WB66 is an ultra high-speed (UHS) dual single-pole/single-throw (SPST) analog switch or 2-bit bus switch. The device is fabricated with advanced sub-micron CMOS technology to achieve high speed enable and disable times and low On Resistance over a broad VCC range. The device is specified to operate over the 1.65 to 5.5V VCC operating range. The device is organized as a dual switch with independent CMOS compatible switch enable (OE) controls. When OE is HIGH, the switch is ON and Port A is connected to Port B. When OE is LOW, the switch is OPEN and a high-impedance state exists between the two ports. The enable inputs tolerate voltages up to 5.5V independent of the VCC operating range. |
| NC7WB66L8X Datasheet and Application Notes |
|
| Parameter | Value |
| Product status | Full Production |
| Pricing* | $0.343 |
| Package type | US8 |
| Leads | 8 |
| Packing method | TAPE REEL |
| Product status | Full Production |
| Pricing* | $0.314 |
| Package type | Micropak |
| Leads | 8 |
| Packing method | TAPE REEL |
| Products related to NC7WB66L8X |
FSA266L8X NC7WB66K8X_NL FSA266 NC7WB66K8X
NC7WB66 FSA266K8X FSA266K8X_NL |