Catalog Categories Part Numbers Manufacturers Search

CA5260AM96

CA5260AM96 Description

Dual 3MHz, BiMOS Microprocessor Operational Amplifiers with MOSFET Input/CMOS Output

CA5260AM96 Description

IC OP AMP DUAL 3MHZ 8-SOIC

CA5260AM96 Categories

BiMOS Amplifiers

CA5260AM96 Manufacturer

Intersil

CA5260AM96 Datasheet (PDF)

3MHz, BiMOS Microprocessor Operational Amplifiers with MOSFET Input/CMOS Output

CA5260AM96 Price & Availability


Check CA5260AM96 Price & Availability at Canics

CA5260AM96 Features

  • MOSFET Input Stage provides
    • Very High ZI: 1.5TΩ (1.5 x 1012Ω) (Typ)
    • Very Low II: 5pA (Typ) at 15V Operation 2pA (Typ) at 5V Operation
  • Ideal for Single Supply Applications
  • Common Mode Input Voltage Range Includes Negative Supply Rail; Input Terminals Can be Swung 0.5V Below Negative Supply Rail
  • CMOS Output Stage Permits Signal Swing to Either (or Both) Supply Rails
  • CA5260A, CA5260 Have Full Military Temperature Range Guaranteed Specifications for V+ = 5V
  • CA5260A, CA5260 are Guaranteed to Operate Down to 4.5V for AOL
  • Fully Guaranteed to Operate from -55°C to +125°C at V+ = 5V, V- = GND
  • Pb-Free Available (RoHS Compliant)

CA5260AM96 Description

The CA5260A and CA5260 are integrated-circuit operational amplifiers that combine the advantage of both CMOS and bipolar transistors on a monolithic chip. The CA5260 series circuits are dual versions of the popular CA5160 series. They are designed and guaranteed to operate in microprocessor or logic systems that use +5V supplies.

Gate-protected P-Channel MOSFET (PMOS) transistors are used in the input circuit to provide very-high-input impedance, very-low-input current, and exceptional speed performance. The use of PMOS field-effect transistors in the input stage results in common-mode input-voltage capability down to 0.5V below the negative-supply terminal, an important attribute in single-supply applications.

A complementary-symmetry MOS (CMOS) transistor-pair, capable of swinging the output voltage to within 10mV of either supply-voltage terminal (at very high values of load impedance), is employed as the output circuit.

The CA5260 Series circuits operate at supply voltages ranging from 4.5V to 16V, or ±2.25V to ±8V when using split supplies.

The CA5260, CA5260A have guaranteed specifications for 5V operation over the full military temperature range of -55°C to +125°C.

CA5260AM96 Parameters

Output TypeRail-to-Rail
Slew Rate5 V/µs
CategoryIntegrated Circuits (ICs)
FamilyAmplifiers - Instrumentation, OP Amps, Buffer Amps
Operating Temperature-55°C ~ 125°C
Package / Case8-SOIC (3.9mm Width)
Number of Circuits2
Voltage - Supply, Single/Dual (±)4.5 V ~ 16 V, ±2.25 V ~ 8 V
Current - Supply9mA
Amplifier TypeGeneral purpose
Current - Input Bias5pA
Voltage - Input Offset2000µV
Current - Output / Channel45mA
Gain Bandwidth Product3MHz
Select parameters and click to see components with these parameters.

Products Similar to CA5260AM96

CA5260, CA5260A, CA5260MZ96, CA5260E, CA5260MZ

 
Other Components
TSW-117-14-T-S
SMBJ90A-E3/52
SSM-113-L-SV
RP50GB
TLV1117-50IKVURG3
Keywords
CA5260AM96 Data Sheet CA5260AM96 Spec CA5260AM96 Application Notes CA5260AM96 Distributor
CA5260AM96 Circuit CA5260AM96 Reference CA5260AM96 PDF CA5260AM96 RoHS