DG441 Datasheet

• ON Resistance (Max) 85?
• Low Power Consumption (PD) <1.6mW
• Fast Switching Action
  • tON (Max) 250ns
  • tOFF (Max, DG441) 120ns
• Low Charge Injection
• Upgrade from DG201A/DG202
• TTL, CMOS Compatible
• Single or Split Supply Operation
• Pb-free Available

• ON Resistance (Max) 85Ω
• Low Power Consumption (P_D) <1.6mW
• Fast Switching Action
  • t_ON (Max) 250ns
  • t_OFF (Max, DG441) 120ns
• Low Charge Injection
• Upgrade from DG201A, DG202
• TTL, CMOS Compatible
• Single or Split Supply Operation
• Pb-Free Plus Anneal Available (RoHS Compliant)

The DG441 and DG442 monolithic CMOS analog switches are drop-in replacements for the popular DG201A and DG202 series devices. They include four independent single pole single throw (SPST) analog switches, TTL and CMOS compatible digital inputs, and a voltage reference for logic thresholds.

These switches feature lower analog ON resistance (<85Ω) and faster switch time (t_ON <250ns) compared to the DG201A and DG202. Charge injection has been reduced, simplifying sample and hold applications.

The improvements in the DG441 series are made possible by using a high voltage silicon-gate process. An epitaxial layer prevents the latch-up associated with older CMOS technologies. The 44V maximum voltage range permits controlling 40VP-P signals. Power supplies may be single ended from +5V to +34V, symmetrical supplies from ±5V to ±22V or asymmetrical supplies limited to a maximum differential voltage of 44V with a V+ max of 34V or a V- max of -25V.

The four switches are bilateral, equally matched for AC or bidirectional signals. The ON resistance variation with analog signals is quite low over a ±5V analog input range. The switches in the DG441 and DG442 are identical, differing only in the polarity of the selection logic.