EL6830CU-T7

EL6830CU-T7 Description

EL6830CU-T7 Categories

EL6830CU-T7 Manufacturer

EL6830CU-T7 Price & Availability

EL6830CU-T7 Features

• "Shrink-small" outline package
• Voltage-controlled output current source requiring one external set resistor per channel
• Current-controlled output current source
• CH2 to 300mA max
• CH3 to 150mA max
• Rise time = 0.8ns
• Fall time = 0.8ns
• On-chip oscillator with frequency and amplitude control by use of external resistors to ground
• Oscillator to 600MHz
• Oscillator to 100mA pk/pk
• Single +5V supply (±10%)
• Disable feature for power-up protection and power savings
• Pb-free available (RoHS compliant)

EL6830CU-T7 Description

The EL6830 is a combination read + 2 write level laser driver with an extra read + oscillator ROM channel for use in dual-laser 'combo' drivers. A separate (amplitude and frequency) oscillator modulates the selected output for laser noise reduction during read or write. All these functions are provided in a 16-pin QSOP package.

The CD pin, when high, selects the CD (write) laser. Positive current supplied to the I_IN lines, through a user-selected resistor, allows the full scale range of each amplifier to be matched to the full scale range of the users control DACs. When the write laser is selected, and the WEN pins are switched low, the respective current is summed to the output with 1ns rise and fall times. Write channel 2 has 300mA output capability with a 300X gain amplifier.

The 100mA_P-P (max) oscillator is switched on and off automatically when WEN2 and WEN3 are pulled high.

The entire chip is powered down when ENABLE is low.