EL7154

EL7154 Manufacturer

EL7154 Description

EL7154 Categories

EL7154 Datasheet (PDF)

EL7154 Price & Availability

EL7154 Features

• Comparatively low cost
• 3-State output
• 3V and 5V Input compatible
• Clocking speeds up to 10MHz
• 20ns switching/delay time
• 4A Peak drive
• Isolated drains
• Low output impedance - 2.5?
• Low quiescent current - 5mA
• Wide operating voltage - 4.5V-16V
• Isolated p-channel device
• Separate ground and V_Lpins

EL7154 Features

• Comparatively low cost
• Three-State output
• 3V and 5V Input compatible
• Clocking speeds up to 10MHz
• 20ns Switching/delay time
• 4A Peak drive
• Isolated drains
• Low output impedance: 2.5Ω
• Low quiescent current: 5mA
• Wide operating voltage: 4.5V to16V
• Isolated P-Channel device
• Separate ground and V_L pins
• Pb-free plus anneal available (RoHS compliant)

EL7154 Description

The EL7154 three-state pin driver is particularly well suited for ATE and level shifting applications. The 4A peak drive capability, makes the EL7154 an excellent choice when driving high speed capacitive lines.

The P-Channel MOSFET is completely isolated from the power supply, providing a high degree of flexibility. Pin (7) can be grounded, and the output can be taken from pin (8) when a "source follower" output is desired. The N-Channel MOSFET has an isolated drain, but shares a common bus with pre-drivers and level shifter circuits. This is necessary to ensure that the N-Channel device can turn off effectively when V_L goes below GND. In some power-FET and IGBT applications, negative drive is desirable to insure effective turn-off. The EL7154 can be used in these applications by returning V_L to a moderate negative potential.

Products Similar to EL7154