EL7155CS-EVAL

EL7155CS-EVAL Manufacturer

EL7155CS-EVAL Description

EL7155CS-EVAL Datasheet (PDF)

EL7155CS-EVAL Price & Availability

EL7155CS-EVAL Features

• Clocking speeds up to 40MHz
• 15ns tr/tf at 2000pF C_LOAD
• 0.5ns rise and fall times mismatch
• 0.5ns TON-TOFF prop delay mismatch
• 3.5pF typical input capacitance
• 3.5A peak drive
• Low on resistance of 3.5Ω
• High capacitive drive capability
• Operates from 4.5V up to 16.5V
• Pb-free plus anneal available (RoHS compliant)

EL7155CS-EVAL Description

The EL7155 high performance pin driver with 3-state is suited to many ATE and level-shifting applications. The 3.5A peak drive capability makes this part an excellent choice when driving high capacitance loads.

Output pins OUT_H and OUT_L are connected to input pins V_H and V_L respectively, depending on the status of the IN pin. One of the output pins is always in 3-state, except when the OE pin is active low, in which case both outputs are in 3-state mode. The isolation of the output FETs from the power supplies enables V_H and V_L to be set independently, enabling level-shifting to be implemented.

This pin driver has improved performance over existing pin drivers. It is specifically designed to operate at voltages down to 0V across the switch elements while maintaining good speed and on-resistance characteristics.

Available in 8-pin SO and 8-pin PDIP packages, the EL7155 is specified for operation over the full -40^oC to +85^oC temperature range.

Products Similar to EL7155CS-EVAL