Catalog Categories Part Numbers Manufacturers Search

HI-509A

HI-509A Manufacturer

Intersil

HI-509A Description

Analog Multiplexer, 4-Channel Differential, Over Voltage Protection

HI-509A Description

16-Channel, 8-Channel, Differential 8-Channel and Differential 4-Channel, CMOS Analog MUXs with Active Overvoltage Protection

HI-509A Categories

Analog Multiplexers

HI-509A Datasheet (PDF)

Analog Switch and Multiplexer Applications
Recommended Test Procedures for Analog Switches
CMOS Analog Multiplexers and Switches; Specifications and Applications Considerations
Analog Multiplexers with Overvoltage Protection
Multiplexed Data Acquisition System Considerations
HI-509A Datasheet
16-Channel, 8-Channel, Differential 8-Channel and Differential 4-Channel, CMOS Analog MUXes with Active Overvoltage Protection

HI-509A Price & Availability


Check HI-509A Price & Availability at Canics

HI-509A Features

  • Analog Overvoltage 70Vp-p
  • No Channel Interaction During Overvoltage
  • Maximum Power Supply 44V
  • Fail Safe with Power Loss (No Latch-Up)
  • Break-Before-Make Switching
  • Analog Signal Range ?15V
  • Access Time 500ns
  • Power Dissipation 7.5mW

HI-509A Features

  • Analog Overvoltage 70VP-P
  • No Channel Interaction During Overvoltage
  • Maximum Power Supply 44V
  • Fail Safe with Power Loss (No Latch-Up)
  • Break-Before-Make Switching
  • Analog Signal Range ±15V
  • Access Time 500ns
  • Power Dissipation 7.5mW
  • Pb-Free Available (RoHS Compliant)

HI-509A Description

The HI-506A, HI-507A, HI-508A and HI-509A are analog multiplexers with active overvoltage protection. Analog input levels may greatly exceed either power supply without damaging the device or disturbing the signal path of other channels. Active protection circuitry assures that signal fidelity is maintained even under fault conditions that would destroy other multiplexers. Analog inputs can withstand constant 70VP-P levels with ±15V supplies. Digital inputs will also sustain continuous faults up to 4V greater than either supply. In addition, signal sources are protected from short circuiting should multiplexer supply loss occur. Each input presents 1kΩ of resistance under this condition. These features make the HI-506A, HI-507A, HI-508A and HI-509A ideal for use in systems where the analog inputs originate from external equipment, or separately powered circuitry. All devices are fabricated with 44V dielectrically isolated CMOS technology. The HI-506A is a single 16-channel multiplexer, the HI-507A is an 8-channel differential multiplexer, the HI-508A is a single 8-channel multiplexer and the HI-509A is a differential 4-channel multiplexer. If input overvoltage protection is not needed the HI-506/507/508/509 multiplexers are recommended. For further information see Application Note AN520.

Products Similar to HI-509A

DG211, DG401, DG403, DG406, DG407

 
Keywords
HI-509A Data Sheet HI-509A Spec HI-509A Application Notes HI-509A Distributor
HI-509A Circuit HI-509A Reference HI-509A PDF HI-509A RoHS