Catalog Categories Part Numbers Manufacturers Search

HS-1145RH

HS-1145RH Manufacturer

Intersil

HS-1145RH Description

Op Amp, Video, Current Feedback, 360MHz, 1000V/?s, Disable

HS-1145RH Description

Video Op-Amp With Output Disable

HS-1145RH Categories

Current Feedback Amplifiers

HS-1145RH Datasheet (PDF)

HS-1145RH Datasheet
Radiation Hardened, High Speed, Low Power, Current Feedback Video Operational Amplifier with Output Disable

HS-1145RH Price & Availability


Check HS-1145RH Price & Availability at Canics

HS-1145RH Features

  • Electrically Screened to SMD # 5962-96830
  • QML Qualified per MIL-PRF-38535 Requirements
  • Low Supply Current 5.9mA (Typ)
  • Wide -3dB Bandwidth 360MHz (Typ)
  • High Slew Rate 1000V/?s (Typ)
  • Excellent Gain Flatness (to 50MHz) ±0.07dB (Typ)
  • Excellent Differential Gain 0.02% (Typ)
  • Excellent Differential Phase 0.03 Degrees (Typ)
  • High Output Current 60mA (Typ)
  • Output Enable/Disable Time 180ns/35ns (Typ)
  • Total Gamma Dose 300kRAD(Si)
  • Latch Up None (DI Technology)

HS-1145RH Features

  • Electrically Screened to SMD # 5962-96830
  • QML Qualified per MIL-PRF-38535 Requirements
  • Low Supply Current 5.9mA (Typ)
  • Wide -3dB Bandwidth 360MHz (Typ)
  • High Slew Rate 1000V/µs (Typ)
  • Excellent Gain Flatness (to 50MHz) ±0.07dB (Typ)
  • Excellent Differential Gain 0.02% (Typ)
  • Excellent Differential Phase 0.03 Degrees (Typ)
  • High Output Current 60mA (Typ)
  • Output Enable / Disable Time 180ns/35ns (Typ)
  • Total Gamma Dose 300kRAD(Si)
  • Latch Up None (DI Technology)

HS-1145RH Description

The HS-1145RH is a high speed, low power current feedback amplifier built with Intersil's proprietary complementary bipolar UHF-1 (DI bonded wafer) process. These devices are QML approved and are processed and screened in full compliance with MIL-PRF-38535.

This amplifier features a TTL/CMOS compatible disable control, pin 8, which when pulled low, reduces the supply current and forces the output into a high impedance state. This allows easy implementation of simple, low power video switching and routing systems. Component and composite video systems also benefit from this op amp's excellent gain flatness, and good differential gain and phase specifications. Multiplexed A/D applications will also find the HS-1145RH useful as the A/D driver/multiplexer.

Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering.

Detailed Electrical Specifications for these devices are contained in SMD 5962-96830.


 
Keywords
HS-1145RH Data Sheet HS-1145RH Spec HS-1145RH Application Notes HS-1145RH Distributor
HS-1145RH Circuit HS-1145RH Reference HS-1145RH PDF HS-1145RH RoHS