Catalog Categories Part Numbers Manufacturers Search

ICL7612

ICL7612 Manufacturer

Intersil

ICL7612 Description

Op Amp, CMOS, Rail-to-Rail I/O, Programmable Icc, 1.4MHz, Low Voltage 1-8Vdc, Low Bias 0.05nA

ICL7612 Description

1.4MHz, Low Power CMOS Operational Amplifiers

ICL7612 Categories

Genral Purpose Op Amplifiers
CMOS Operational Amplifiers

ICL7612 Datasheet (PDF)

ICL7612 Datasheet
1.4MHz, Low Power CMOS Operational Amplifiers

ICL7612 Price & Availability


Check ICL7612 Price & Availability at Canics

ICL7612 Features

  • Wide Operating Voltage Range ±1V to ±8V
  • High Input Impedance 1012?
  • Programmable Power Consumption Low as 20?W
  • Input Current Lower Than BIFETs 1pA (Typ)
  • Output Voltage Swing V+ and V-
  • Input Common Mode Voltage Range Greater Than Supply Rails (ICL7612)

ICL7612 Features

  • Wide Operating Voltage Range ±1V to ±8V
  • High Input Impedance 1012Ω
  • Programmable Power Consumption Low as 20μW
  • Input Current Lower Than BIFETs 1pA (Typ)
  • Output Voltage Swing V+ and V-
  • Input Common Mode Voltage Range Greater Than Supply Rails (ICL7612)
  • Pb-Free Plus Anneal Available (RoHS Compliant)

ICL7612 Description

The ICL761X series is a family of CMOS operational amplifiers. These devices provide the designer with high performance operation at low supply voltages and selectable quiescent currents, and are an ideal design tool when ultra low input current and low power dissipation are desired.

The basic amplifier will operate at supply voltages ranging from ±1V to ±8V, and may be operated from a single Lithium cell.

A unique quiescent current programming pin allows setting of standby current to 1mA, 100μA, or 10μA, with no external components. This results in power consumption as low as 20μW. The output swing ranges to within a few millivolts of the supply voltages.

Of particular significance is the extremely low (1pA) input current, input noise current of 0.01pA/√Hz, and 1012Ω input impedance. These features optimize performance in very high source impedance applications.

The inputs are internally protected. Outputs are fully protected against short circuits to ground or to either supply. AC performance is excellent, with a slew rate of 1.6V/μs, and unity gain bandwidth of 1MHz at IQ = 1mA.

Because of the low power dissipation, junction temperature rise and drift are quite low. Applications utilizing these features may include stable instruments, extended life designs, or high density packages.

Products Similar to ICL7612

ICL7611

 
Keywords
ICL7612 Data Sheet ICL7612 Spec ICL7612 Application Notes ICL7612 Distributor
ICL7612 Circuit ICL7612 Reference ICL7612 PDF ICL7612 RoHS