Catalog Categories Part Numbers Manufacturers Search

ISL12026IBZ

ISL12026IBZ Description

ISL12026IBZ Description

ISL12026IBZ Description

ISL12026IBZ Description

ISL12026IBZ Categories

ISL12026IBZ Manufacturer

ISL12026IBZ Datasheet (PDF)

ISL12026IBZ Price & Availability


Check ISL12026IBZ Price & Availability at Canics

ISL12026IBZ Features

  • Real Time Clock/Calendar
    • Tracks Time in Hours, Minutes and Seconds
    • Day of the Week, Day, Month and Year
    • 3 Selectable Frequency Outputs
  • Two Non-Volatile Alarms
    • Settable on the Second, Minute, Hour, Day of the Week, Day or Month
    • Repeat Mode (Periodic Interrupts)
  • Automatic Backup to Battery or SuperCap
  • On-Chip Oscillator Compensation
    • Internal Feedback Resistor and Compensation Capacitors
    • 64 Position Digitally Controlled Trim Capacitor
    • 6 Digital Frequency Adjustment Settings to ±30ppm
  • 512x8 Bits of EEPROM
    • 16-Byte Page Write Mode (32 total pages)
    • 8 Modes of BlockLock? Protection
    • Single Byte Write Capability
  • High Reliability
    • Data Retention: 50 years
    • Endurance: >2,000,000 Cycles Per Byte
  • I2C Interface
    • 400kHz Data Transfer Rate
  • 800nA Battery Supply Current
  • Package Options
    • 8 Ld SOIC and 8 Ld TSSOP Packages
  • Pb-Free (RoHS Compliant)

ISL12026IBZ Description

The ISL12026 and the ISL12026A devices are micro power real time clocks with timing and crystal compensation, clock/calender, power-fail indicator, two periodic or polled alarms, intelligent battery backup switching, and integrated 512x8-bit EEPROM configured in 16 Bytes per page.

The oscillator uses an external, low-cost 32.768kHz crystal. The real time clock tracks time with separate registers for hours, minutes, and seconds. The device has calendar registers for date, month, year and day of the week. The calendar is accurate through 2099, with automatic leap year correction.

The ISL12026 and ISL12026A have different types of Power Control Settings. The ISL12026 uses the Legacy Mode Setting, which follows conditions set in X1226 products. The ISL12026A uses the Standard Mode Setting. Please refer to "Power Control Operation" on page 13 for more details. Also, please refer to "I2C Communications During Battery Backup" on page 22 for important details.

ISL12026IBZ Parameters

Products Similar to ISL12026IBZ


 

Other Components
EMML21L2H-150.8072M
ST2-2L5S5V30BJ3J9322
MIC39100-1.8WS
BQ2024DBZRG4
LT3435EFE#PBF
Keywords
ISL12026IBZ Data Sheet ISL12026IBZ Spec ISL12026IBZ Application Notes ISL12026IBZ Distributor
ISL12026IBZ Circuit ISL12026IBZ Reference ISL12026IBZ PDF ISL12026IBZ RoHS