ISL6217 DescriptionISL6217 CategoriesISL6217 Manufacturer
ISL6217 Datasheet (PDF)
ISL6217 Price & Availability
ISL6217 Features
-
IMVP-IV? and IMVP-IV+? Compliant CORE Regulator
-
Single and/or Two-phase Power Conversion
-
"Loss-less" Current sensing for improved efficiency and reduced board area
-
Optional Discrete Precision Current Sense Resistor
-
Internal Gate-Drive and Boot-Strap Diodes
-
Precision CORE Voltage Regulation
-
0.8% system accuracy over temperature
-
6-Bit Microprocessor Voltage Identification Input
-
Programmable "Droop" and CORE Voltage Slew Rate to comply with IMVP-IV? and IMVP-IV+? specification
-
Direct Interface with System Logic (STP_CPU# and DPRSLPVR) for Deep and Deeper Sleep modes of operation
-
Easily Programmable voltage setpoints for Initial "Boot", Deep Sleep and Deeper Sleep Modes
-
Excellent Dynamic Response
-
Combined Voltage Feed-Forward and Average Current Mode Control
-
Overvoltage, Undervoltage and Overcurrent Protection
-
Power-Good Output with internal blanking during VID and mode changes
-
User programmable Switching Frequency of 250kHz - 1MHz per phase
-
Pb-Free Plus Anneal Available (RoHS Compliant)
ISL6217 Description
The ISL6217 Multi-Phase Buck PWM control IC, with integrated half bridge gate drivers, provides a precision voltage regulation system for advanced Pentium" IV microprocessors in notebook computers. Two-phase operation eases the thermal management issues and load demand of Intel's latest high performance processors. This control IC also features both input voltage feed-forward and average current mode control for excellent dynamic response, "Loss-less" current sensing using MOSFET RDS(ON) and user selectable switching frequencies from 250kHz to 1MHz per phase.
The ISL6217 includes a 6-bit digital-to-analog converter (DAC) that dynamically adjusts the CORE PWM output voltage from 0.700V to 1.708V in 16mV steps and conforms to the Intel IMVP-IV? and IMVP-IV+? mobile VID specification. The ISL6217 also has logic inputs to select Active, Deep Sleep and Deeper Sleep modes of operation. A precision reference, remote sensing and proprietary architecture, with integrated processor-mode compensated "Droop", provide excellent static and dynamic CORE voltage regulation.
To improve efficiency at light loading, the ISL6217 can be configured to run in single phase PWM in ACTIVE, DEEP or DEEPER SLEEP modes of operation.
Another feature of this IC controller is the PGOOD monitor circuit that is held low until CORE voltage increases, during its soft-start sequence, to within 12% of the "Boot" voltage. This PGOOD signal is masked during VID changes. Output Overcurrent, Overvoltage and Undervoltage are monitored and result in the converter latching off and PGOOD signal being held low.
The Overvoltage and Undervoltage thresholds are 112% and 84% of the VID, Deep or Deeper Sleep setpoint, respectively. Overcurrent protection features a 32 cycle Overcurrent shutdown. PGOOD, Overvoltage, Undervoltage and Overcurrent provide monitoring and protection for the microprocessor and power system. The ISL6217 IC is available in a 38 lead TSSOP.
Products Similar to ISL6217
Other Components
PE-1206CCMC222STS LTM8061IV-8.2#PBF EMK11G2J-83.000M TR MAX6718AUKZGD6+T PZC33DBAN
Keywords
| ISL6217 Data Sheet |
ISL6217 Spec |
ISL6217 Application Notes |
ISL6217 Distributor |
| ISL6217 Circuit |
ISL6217 Reference |
ISL6217 PDF |
ISL6217 RoHS |
|