| TC3402 Description | | The TC3402 is a low cost, low power analog-to-digital converter based on Microchip’s Sigma-Delta technology. It will perform 16-bit conversions (15-bit plus sign) at up to eight per second. The TC3402 is optimized for use as a microcontroller peripheral in low cost, battery operated systems. A voltage reference is included, or an external reference can be used. The TC3402’s 2-wire MicroPort™ digital interface is used for starting conversions and for reading out the data. Driving the SCLK line low starts a conversion. After the conversion starts, each additional falling edge (up to six) detectedonSCLKfor t4 secondsreducestheA/Dresolution by one bit and cuts conversion time in half. After a conversion is completed, clocking the SCLK line puts the MSB through LSB of the resulting data word onto the SDAT line, much like a shift register. The part automatically sleeps when not performing a data conversion. The TC3402 is available in 16-Pin PDIP and 16-Pin QSOP packages. | | TC3402 Vendor | | Microchip | | TC3402 Categories | | | TC3402 Features | - 16-Bit Resolution at Eight Conversions Per Second,
Adjustable Down to 10-Bit Resolution at 51
Conversions Per Second
- 1.8V – 5.5V Operation
Low Power Operating...............250µA
Sleep...............0.75µA
- MicroPort™ Serial Bus Requires Only Two Interface Lines
- Uses Internal or External Reference
- Automatically Enters Sleep Mode When Not In Use
- Four True Differential Inputs with Built-In Multiplexer
| | TC3402 Datasheet and Application Notes | | | Parameter | Value | | Typical Supply Current (µA) | 250 | | Typical INL (%FSR) | 0.0038 | | Max Sampling Rate (samples/sec) | >400 | | Input Type | 4 Differential | | Resolution (bits) | 10 to 16 | | Interface | 2-wire | | Supply Voltage Range (V) | 1.8 to 5.5 - 0 to +85 |
|