| TC3405 Description |
| The TC3405 is a low cost, low power analog-to-digital converter based on Microchip’s Sigma-Delta technology. It performs 16-bit conversions (15-bit plus sign) at up to eight per second.Thedeviceis optimizedforuseas microcontroller peripherals in low cost, battery operated systems. A voltage reference is included, or an external reference can be used. A VDD monitor with reset generator provides Power-On Reset and Brown-out protection. The TC3405’s 2-wire MicroPort™ digital interface is used for starting conversions and for reading out the data. Driving the SCLK line low starts a conversion. After the conversion starts, each additional falling edge (up to six) detected on SCLK for t4 seconds reduces the A/D resolution by one bit and cuts conversion time in half. After a conversion is completed, clocking the SCLK line puts the MSB through LSB of the resulting data word onto the SDAT line, much like a shift register. The parts automatically sleep when not performing a data conversion. The TC3405 is available in PDIP and QSOP packages. |
| TC3405 Vendor |
| Microchip |
| TC3405 Categories |
|
| TC3405 Features |
- 16-Bit Resolution at Eight Conversions Per Second,
Adjustable Down to 10-Bit Resolution at 512
Conversions Per Second
- 1.8V – 5.5V Operation
Low Power Operating...............250µA
Sleep...............35µA
- One Differential and Three Single Ended Inputs with
 Built-In Multiplexer
- MicroPort™ Serial Bus Requires Only Two Interface Lines
- Uses Internal or External Reference
- VDD Monitor and Reset Generator Operational in
Shutdown Mode
- Automatically Enters Sleep Mode When Not In Use
|
| TC3405 Datasheet and Application Notes |
|
| Parameter | Value |
| Typical Supply Current (µA) | 250 |
| Typical INL (%FSR) | 0.0038 |
| Max Sampling Rate (samples/sec) | >400 |
| Input Type | 3 Single-ended,Differential |
| Resolution (bits) | 10 to 16 |
| Interface | 2-wire |
| Supply Voltage Range (V) | 1.8 to 5.5 - 0 to +85 |