ADC08L060EVAL

ADC08L060EVAL Description

ADC08L060EVAL Manufacturer

ADC08L060EVAL Datasheet (PDF)

ADC08L060EVAL Price & Availability

ADC08L060EVAL Features

• Single-ended input
• Internal sample-and-hold function
• Low voltage (single +3V) operation
• Small package
• Power-down feature

ADC08L060EVAL Description

The ADC08L060 is a low-power, 8-bit, monolithic analog-to-digital converter with an on-chip track-and-hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates of 10 MSPS to 60 MSPS while consuming just 0.65 mW per MHz of clock frequency, or 39 mW at 60 MSPS. Raising the PD pin puts the ADC08L060 into a Power Down mode where it consumes about 1 mW.

The unique architecture achieves 7.6 Effective Bits. The ADC08L060 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC08L060s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible with a separate output power supply pin to support interfacing with 1.8V to 3V logic. The digital inputs (CLK and PD) are TTL/CMOS compatible.

The ADC08L060 is offered in a 24-lead plastic package (TSSOP) and is specified over the industrial temperature range of -40°C to +85°C. An evaluation board is available to assist in the evaluation of the ADC08L060.

ADC08L060EVAL Parameters

Products Similar to ADC08L060EVAL