ADC12034CIWM

ADC12034CIWM Manufacturer

ADC12034CIWM Description

ADC12034CIWM Datasheet (PDF)

ADC12034CIWM Price & Availability

ADC12034CIWM Features

• Serial I/O (MICROWIRE Compatible)
• 2, 4, or 8 channel differential or single-ended multiplexer
• Analog input sample/hold function
• Power down mode
• Variable resolution and conversion rate
• Programmable acquisition time
• Variable digital output word length and format
• No zero or full scale adjustment required
• Fully tested and guaranteed with a 4.096V reference
• 0V to 5V analog input range with single 5V power supply
• No Missing Codes over temperature

ADC12034CIWM Description

The ADC12030, and ADC12H030 families are 12-bit plus sign successive approximation A/D converters with serial I/O and configurable input multiplexers. The ADC12032/ADC12H032, ADC12034/ADC12H034 and ADC12038/ADC12H038 have 2, 4 and 8 channel multiplexers, respectively. The differential multiplexer outputs and A/D inputs are available on the MUXOUT1, MUXOUT2, A/DIN1 and A/DIN2 pins. The ADC12030/ADC12H030 has a two channel multiplexer with the multiplexer outputs and A/D inputs internally connected. The ADC12030 family is tested with a 5 MHz clock, while the ADC12H030 family is tested with an 8 MHz clock. On request, these A/Ds go through a self calibration process that adjusts linearity, zero and full-scale errors to less than ±1 LSB each.

The analog inputs can be configured to operate in various combinations of single-ended, differential, or pseudo-differential modes. A fully differential unipolar analog input range (0V to +5V) can be accommodated with a single +5V supply. In the differential modes, valid outputs are obtained even when the negative inputs are greater than the positive because of the 12-bit plus sign output data format.

The serial I/O is configured to comply with the NSC MICROWIRE. For voltage references see the LM4040 or LM4041.

ADC12034CIWM Parameters

Products Similar to ADC12034CIWM