CR16MFS944V8

CPU Features
- Fully static core, capable of operating at any rate from 0 to 24MHz (4 MHz minimum in active mode)
- Multi-source vectored interrupts (internal, external, and on-chip peripheral)
- On-chip power-on reset
On-Chip Memory
- 48 kbytes of flash program memory or ROM memory (100K cycle)
- 1.5 kbytes of ISP memory (100K cycle)
- 2 kbytes of static RAM data memory
- 640 bytes of non-volatile EEPROM data memory, word-programmable (100K cycle)
On-Chip Peripherals
- Up to two Universal Synchronous/Asynchronous Receiver/Transmitter (USART) devices
- Programmable Idle Timer and real-time clock (T0)
- Up to two dual 16-bit multi-function timers (MFT1 and MFT2)
- SPI/MICROWIRE-PLUS serial interface
- 8-channel, 8-bit Analog-to-Digital (A/D) converter with external voltage reference, programmable sample-and-hold delay, and programmable conversion frequency
- Up to two analog comparators
- Integrated WATCHDOG logic
I/O Features
- Up to 48 general-purpose I/O pins (shared with on-chip peripheral I/O pins)
- Programmable I/O pin characteristics: TRI-STATE output, push-pull output, weak pull-up input, high-impedance input
- Software-configurable Schmitt triggers on inputs
Power Supply
- 4.5V to 5.5V single-supply operation
Temperature Range
- 0°C to +70°C
- -40°C to +85°C
- -40°C to +125°C
Development Support
- Real-time emulation and full program debug capabilities available
- CompactRISC tools provide C programming and debugging support

CR16MFS944V8 Manufacturer