Catalog Categories Part Numbers Manufacturers Search

LM12CL

LM12CL Description

LM12CL Categories

LM12CL Manufacturer

LM12CL Datasheet (PDF)

LM12CL Datasheet

LM12CL Price & Availability


Check LM12CL Price & Availability at Canics

LM12CL Description

    The LM12 is a power op amp capable of driving ±25V at ±10A while operating from ±30V supplies. The monolithic IC can deliver 80W of sine wave power into a 4 load with 0.01% distortion. Power bandwidth is 60 kHz. Further, a peak dissipation capability of 800W allows it to handle reactive loads such as transducers, actuators or small motors without derating. Important features include:

    input protectioncontrolled turn onthermal limitingovervoltage shutdownoutput-current limitingdynamic safe-area protection

    The IC delivers ±10A output current at any output voltage yet is completely protected against overloads, including shorts to the supplies. The dynamic safe-area protection is provided by instantaneous peak-temperature limiting within the power transistor array.

    The turn-on characteristics are controlled by keeping the output open-circuited until the total supply voltage reaches 14V. The output is also opened as the case temperature exceeds 150°C or as the supply voltage approaches the BVCEO of the output transistors. The IC withstands overvoltages to 80V.

    This monolithic op amp is compensated for unity-gain feedback, with a small-signal bandwidth of 700 kHz. Slew rate is 9V/µs, even as a follower. Distortion and capacitive-load stability rival that of the best designs using complementary output transistors. Further, the IC withstands large differential input voltages and is well behaved should the common-mode range be exceeded.

    The LM12 establishes that monolithic ICs can deliver considerable output power without resorting to complex switching schemes. Devices can be paralleled or bridged for even greater output capability. Applications include operational power supplies, high-voltage regulators, high-quality audio amplifiers, tape-head positioners, x-y plotters or other servo-control systems.

    The LM12 is supplied in a four-lead, TO-3 package with V- on the case. A gold-eutectic die-attach to a molybdenum interface is used to avoid thermal fatigue problems. The L

    LM12CL Parameters

    StatusFull production
    PackageTO-3
    Pins4
    Pricing$16.90
    Select parameters and click to see components with these parameters.

    Products Similar to LM12CL


     

    Other Components
    PCM1781
    LT1787HS8
    AHN22305
    EMS21HHA-18.432M TR
    SQT-119-01-L-D
    Keywords
    LM12CL Data Sheet LM12CL Spec LM12CL Application Notes LM12CL Distributor
    LM12CL Circuit LM12CL Reference LM12CL PDF LM12CL RoHS