LM2612ATL

LM2612ATL Description

LM2612ATL Manufacturer

LM2612ATL Datasheet (PDF)

LM2612ATL Price & Availability

LM2612ATL Features

• Sub-miniature 10-pin micro SMD package
• Only three tiny surface-mount external components required
• Uses small ceramic capacitors
• Internal soft start
• Current overload protection
• No external compensation required
• Thermal shutdown protection

LM2612ATL Description

The LM2612 step-down DC-DC converter is optimized for powering ultra-low voltage circuits from a single Lithium-Ion cell. It provides up to 400mA (300mA for B grade), over an input voltage range of 2.8V to 5.5V. Pin programmable output voltages of 1.05V, 1.3V, 1.5V or 1.8V allow adjustment for MPU voltage options without board redesign or external feedback resistors.

The device has three pin-selectable modes for maximizing battery life in mobile phones and similar portable applications. Low-noise PWM mode offers 600kHz fixed-frequency operation to reduce interference in RF and data acquisition applications during full-power operation. In PWM mode, internal synchronous rectification provides high efficiency (91% typ. at 1.8V_OUT). A SYNC input allows synchronizing the switching frequency in a range of 500kHz to 1MHz to avoid noise from intermodulation with system frequencies. Low-current hysteretic PFM mode reduces quiescent current to 160 ľA (typ.) during system standby. Shutdown mode turns the device off and reduces battery consumption to 0.02ľA (typ.). Additional features include soft start and current overload protection.

The LM2612 is available in a 10 pin micro SMD packge. This package uses National's wafer level chip-scale micro SMD technology and offers the smallest possible size. Only three small external surface-mount components, an inductor and two ceramic capacitors are required.

LM2612ATL Parameters

Products Similar to LM2612ATL