LM2619ATLX

LM2619ATLX Description

LM2619ATLX Manufacturer

LM2619ATLX Datasheet (PDF)

LM2619ATLX Price & Availability

LM2619ATLX Features

• Sub-miniature 10-bump thin micro SMD package
• Uses small ceramic capacitors
• 5mV typ PWM mode output voltage ripple(C_OUT = 22µF)
• Internal soft start
• Current overload protection
• Thermal Shutdown
• External compensation

LM2619ATLX Description

The LM2619 step down DC-DC converter is optimized for powering circuits from a single Lithium-Ion cell. It steps down an input voltage of 2.8V to 5.5V to an output of 1.5V to 3.6V at up to 500mA. Output voltage is set using resistor feedback dividers.

The device offers three modes for mobile phones and similar portable applications. Fixed-frequency PWM mode minimizes RF interference. A SYNC input allows synchronizing the switching frequency in a range of 500kHz to 1MHz. Low current hysteretic PFM mode reduces quiescent current to 160µA (typ.). Shutdown mode turns the device off and reduces battery consumption to 0.02µA (typ.).

Current limit and thermal shutdown features protect the device and system during fault conditions.

The LM2619 is available in a 10 bump micro SMD package. This packaging uses National's chip-scale micro SMD technology and offers the smallest possible size. A high switching frequency (600kHz) allows use of tiny surface-mount components.

The device features external compensation to tailor the response to a wide range of operating conditions.

LM2619ATLX Parameters

Products Similar to LM2619ATLX