LM2781
LM2781 Description
Ultra-Low Ripple Switched Capacitor Voltage Inverter
LM2781 Vendor
National Semiconductor
LM2781 Categories
LM2781 Features
  • Inverts Input Voltage
  • Ultra-Low Voltage Ripple and 8 Typical Output Resistance with Two Flying Capacitors
  • Output Resistance of 18 Using One Flying Capacitor
  • 210kHz (typ.) Switching Frequency
  • 8-pin micro SMD Package (1.4mm × 1.4mm × 0.5mm)
LM2781 Description

    The LM2781 is a charge pump that inverts an input voltage in the range of 1.8V to 5.5V to the corresponding output voltage of -1.8V to -5.5V. With use of three or four low-cost external ceramic capacitors, the LM2781 can provide up to 50mA of output current.

    The LM2781 operates at a 210kHz typical switching frequency to minimize supply current (0.7mA typ.). Two charge pumps operate 180° out of phase to significantly reduce the output voltage ripple compared to that of traditional single-phase charge pump circuits. If larger output ripple can be tolerated, optional capacitor C2 may be omitted to reduce the cost and size of the solution. The LM2781 is available in an 8-pin Micro SMD chip-scale package.

    See also: LM2780, a slow clock (12kHz typ) version of this topology with extremely low supply current.

LM2781 Datasheet and Application Notes
ParameterValue
Temperature Min (deg C)-40
Temperature Max (deg C)85
Multiple Output CapabilityNo
On/Off PinYes
Error FlagNo
InputMin Voltage (Volt)1.80
InputMax Voltage (Volt)5.50
Output Current (mA)50
Adjustable OutputNo
Switching Frequency (Hz)210000
Adj Switch FrequencyNo
Sync PinNo
Efficiency (%)92
InvertingYes
RegTypeSwitched Capacitor
Products related to LM2781
LM2781TP   LM2781TPX   

ChipCatalog.com - Your Source of Information About Electronic Components