LM3875T

LM3875T Description

LM3875T Description

LM3875T Categories

LM3875T Manufacturer

LM3875T Datasheet (PDF)

LM3875T Price & Availability

LM3875T Features

• 56W continuous average output power into 8
• 100W instantaneous peak output power capability
• Signal-to-Noise Ratio >95dB (min)
• Output protection from a short to ground or to the supplies via internal current limiting circuitry
• Output over-voltage protection against transients from inductive loads
• Supply under-voltage protection, not allowing internal biasing to occur when |V+| + |V-| <= 12V, thus eliminating turn-on and turn-off transients
• 11 lead TO-220 package
• Wide supply voltage range: |V+| + |V-| = 20V to 84V

LM3875T Description

The LM3875 is a high-performance audio power amplifier capable of delivering 56W of continuous average power to an 8 load with 0.1% THD+N from 20Hz to 20kHz.

The performance of the LM3875, utilizing its Self Peak Instantaneous Temperature (°Ke) (SPiKe?) protection circuitry, puts it in a class above discrete and hybrid amplifiers by providing an inherently, dynamically protected Safe Operating Area (SOA). SPiKe protection means that these parts are completely safeguarded at the output against overvoltage, undervoltage, overloads, caused by shorts to the supplies, thermal runaway, and instantaneous temperature peaks.

The LM3875 maintains an excellent signal-to-noise ratio of greater than 95dB(min) with a typical low noise floor of 2.0µV. It exhibits extremely low THD+N values of 0.06% at the rated output into the rated load over the audio spectrum, and provides excellent linearity with an IMD (SMPTE) typical rating of 0.004%.

LM3875T Parameters

Products Similar to LM3875T