LM4893ITLX

LM4893ITLX Description

LM4893ITLX Categories

LM4893ITLX Manufacturer

LM4893ITLX Datasheet (PDF)

LM4893ITLX Price & Availability

LM4893ITLX Features

• No output coupling capacitors, snubber networks or bootstrap capacitors required
• Unity gain stable
• Ultra low current shutdown mode
• Instantaneous turn-on time
• BTL output can drive capacitive loads up to 100pF
• Advanced pop & click circuitry eliminates noises during turn-on and turn-off transitions
• 2.2V - 5.5V operation
• Available in space-saving µSMD, SO, and MSOP packages

LM4893ITLX Description

The LM4893 is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1.1 watt of continuous average power to an 8 BTL load with less than 1% distortion (THD+N) from a 5V_DC power supply.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4893 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for lower-power portable applications where minimal space and power consumption are primary requirements.

The LM4893 features a low-power consumption global shutdown mode, which is achieved by driving the shutdown pin with logic low. Additionally, the LM4893 features an internal thermal shutdown protection mechanism.

The LM4893 contains advanced pop & click circuitry which eliminates noises which would otherwise occur during turn-on and turn-off transitions.

The LM4893 is unity-gain stable and can be configured by external gain-setting resistors.

LM4893ITLX Parameters

Products Similar to LM4893ITLX