Catalog Categories Part Numbers Manufacturers Search

LMC6035IBP

LMC6035IBP Description

Low Power 2.7V Single Supply CMOS Operational Amplifiers

LMC6035IBP Description

IC OP AMP SUPP CMOS 8-MICROSMD

LMC6035IBP Description

IC OP AMP SUPP CMOS 8-USMD

LMC6035IBP Categories

CMOS Operational Amplifiers

LMC6035IBP Manufacturer

National Semiconductor

LMC6035IBP Datasheet (PDF)

LMC6035IBP Datasheet

LMC6035IBP Price & Availability


Check LMC6035IBP Price & Availability at Canics

LMC6035IBP Features

  • LMC6035 in micro SMD Package
  • Guaranteed 2.7V, 3V, 5V and 15V Performance
  • Specified for 2 k and 600 Loads
  • Wide Operating Range: 2.0V to 15.5V
  • Ultra Low Input Current: 20fA
  • Rail-to-Rail Output Swing @ 600: 200mV from either rail at 2.7V @ 100k: 5mV from either rail at 2.7V
  • High Voltage Gain: 126dB
  • Wide Input Common-Mode Voltage Range -0.1V to 2.3V at VS = 2.7V
  • Low Distortion: 0.01% at 10kHz
  • LMC6035 Dual LMC6036 Quad
  • See AN-1112 for micro SMD considerations

LMC6035IBP Description

    The LMC6035/6 is an economical, low voltage op amp capable of rail-to-rail output swing into loads of 600. LMC6035 is available in a chip sized package (8-Bump micro SMD) using National's micro SMD package technology. Both allow for single supply operation and are guaranteed for 2.7V, 3V, 5V and 15V supply voltage. The 2.7 supply voltage corresponds to the End-of-Life voltage (0.9V/cell) for three NiCd or NiMH batteries in series, making the LMC6035/6 well suited for portable and rechargeable systems. It also features a well behaved decrease in its specifications at supply voltages below its guaranteed 2.7V operation. This provides a "comfort zone" for adequate operation at voltages significantly below 2.7V. Its ultra low input currents (IIN) makes it well suited for low power active filter application, because it allows the use of higher resistor values and lower capacitor values. In addition, the drive capability of the LMC6035/6 gives these op amps a broad range of applications for low voltage systems.

    LMC6035IBP Parameters

    StatusFull production
    PackagemicroSMD
    Temperature Min (deg C)-40
    Temperature Max (deg C)85
    Pins8
    Pricing$0.50
    Output TypeRail-to-Rail
    Channels (Channels)2
    Input OutputTypeVcm to V-, R-R Out
    Gain Bandwidth (MHz)1.40
    Slew Rate (Volts/usec)1.50
    SupplyCurrent Per Channel (mA).40
    Supply Min (Volt)2.70
    Supply Max (Volt)15
    Offset Voltage (mV)5
    Max Input Bias Current (nA).09
    Output Current (mA)5
    Voltage Noise (nV/Hz)27
    Shut downNo
    Special FeaturesUndefined
    Slew Rate1.5 V/µs
    CategoryIntegrated Circuits (ICs)
    FamilyAmplifiers - Instrumentation, OP Amps, Buffer Amps
    Operating Temperature-40°C ~ 85°C
    Package / Case8-MicroSMD
    Number of Circuits2
    Voltage - Supply, Single/Dual (±)2 V ~ 15.5 V, ±1 V ~ 7.75 V
    Current - Supply650µA
    Amplifier TypeGeneral purpose
    Current - Input Bias0.02pA
    Voltage - Input Offset500µV
    Current - Output / Channel8mA
    Gain Bandwidth Product1.4MHz
    Select parameters and click to see components with these parameters.

    Products Similar to LMC6035IBP

    LMC6035, LMC6035MDA, LMC6035IBPX, LMC6035IM, LMC6035IMM

     
    Other Components
    FX6-80P-0.8SV1(93)
    PCA9555DB,118
    RCM25DCTI
    78285-0001.
    TNPU0805240KBZEN00
    Keywords
    LMC6035IBP Data Sheet LMC6035IBP Spec LMC6035IBP Application Notes LMC6035IBP Distributor
    LMC6035IBP Circuit LMC6035IBP Reference LMC6035IBP PDF LMC6035IBP RoHS