Catalog Categories Part Numbers Manufacturers Search

LMX2471

LMX2471 Description

LMX2471 Categories

LMX2471 Manufacturer

LMX2471 Datasheet (PDF)

LMX2471 Datasheet

LMX2471 Price & Availability


Check LMX2471 Price & Availability at Canics

LMX2471 Features

  • Low in-band phase noise and low fractional spurs
  • 12 bit or 22 bit selectable fractional modulus
  • Up to 4th order programmable delta-sigma modulator
  • Enhanced Anti-Cycle Slip Fastlock Circuitry Fastlock Cycle slip reduction Integrated timeout counters
  • Digital lock detect output
  • Prescalers allow wide range of N values RF PLL: 16/17/20/21 IF PLL: 8/9 or 16/17
  • Crystal Reference Frequency up to 110 MHz
  • On-chip crystal reference frequency doubler.
  • Phase Comparison Frequency up to 50 MHz
  • Hardware and software power-down control
  • Ultra low consumption: ICC = 5.6 mA (typical)

LMX2471 Description

    The LMX2471 is a low power, high performance delta-sigma fractional-N PLL with an auxiliary integer-N PLL. The device is fabricated using National Semiconductor's advanced BiCMOS process.

    With delta-sigma architecture, fractional spur compensation is achieved with noise shaping capability of the delta-sigma modulator and the inherent low pass filtering of the PLL loop filter. Fractional spurs at lower frequencies are pushed to higher frequencies outside the loop bandwidth. Unlike analog compensation, the digital feedback techniques used in the LMX2471 are highly resistant to changes in temperature and variations in wafer processing. With delta-sigma architecture, the ability to push close in spur and phase noise energy to higher frequencies is a direct function of the modulator order. The higher the order, the more this energy can be spread to higher frequencies. The LMX2471 has a programmable modulator up to order four, which allows the designer to select the optimum modulator order to fit the phase noise, spur, and lock time requirements of the system.

    Programming is fast and simple. Serial data is transferred into the LMX2471 via a three line MICROWIRE interface (Data, Clock, Load Enable). Nominal supply voltage is 2.5 V. The LMX2471 features a typical current consumption of 5.6 mA at 2.5 V. The LMX2471 is available in a 24 lead 3.5 X 4.5 X 0.6 mm package.

    LMX2471 Parameters

    StatusFull production
    Packageevaluation board
    Pinsevaluation board
    Pricing$176.00
    Select parameters and click to see components with these parameters.

    Products Similar to LMX2471


     

    Other Components
    ST32TA104
    BK1608HS600-T
    SY100ELT22ZC TR
    P4SMA200AHE3/5A
    0256.375M-
    Keywords
    LMX2471 Data Sheet LMX2471 Spec LMX2471 Application Notes LMX2471 Distributor
    LMX2471 Circuit LMX2471 Reference LMX2471 PDF LMX2471 RoHS