ISP1160

ISP1160 Description

ISP1160 Categories

ISP1160 Manufacturer

ISP1160 Datasheet (PDF)

ISP1160 Price & Availability

ISP1160 Features

• Complies with Universal Serial Bus Specification Rev. 2.0
• Supports data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s)
• Adapted from Open Host Controller Interface Specification for USB Release 1.0a
• Selectable one or two downstream ports for HC
• High-speed parallel interface to most of the generic microprocessors and Reduced Instruction Set Computer (RISC) processors such as:
  • Hitachi ® SuperH^TMSH-3 and SH-4
  • MIPS-based^TMRISC
  • ARM7^TM, ARM9^TM, and StrongARM ®
• Maximum 15 Mbyte/s data transfer rate between the microprocessor and the HC
• Supports single-cycle and burst mode DMA operations
• Built-in FIFO buffer RAM for the HC (4 kbytes)
• Endpoints with double buffering to increase throughput and ease real-time data transfer for isochronous (ISO) transactions
• 6 MHz crystal oscillator with integrated PLL for low EMI
• Built-in software selectable internal 15 kOhm pull-down resistors for HC downstream ports
• Dedicated pins for suspend sensing output and wake-up control input for flexible applications
• Operation at either +5 V or +3.3 V power supply voltage
• Operating temperature range from -40 Cel to+85 Cel
• Available in two LQFP64 packages (SOT314-2 and SOT414-1).

Products Similar to ISP1160