TLK3118 Datasheet

Redundant Quad 3.2-Gbps Transceiver Configurable as 10-Gbps Attachment Unit Interface (XAUI) Transceiver
IEEE P802.3ae-2002 10 Gbps Ethernet XGXS (XGMII Extender Sublayer) Compliant
Redundancy: Fast Switching from Primary to Secondary XAUI channel with Provisionable Error Character or Local Code Fault Insertion at Switch Time
XAUI: Transmit Pre-Emphasis and Receive Adaptive Equalization to Allow Extended Backplane Reach
Selectable Full Duplex XAUI Retimer Mode
Support PRBS 27-1 & 223 - 1 Generate/verify. Support Standard Defined CJPAT, CRPAT, High Freq, Low Freq, and Mixed Freq testing
XGMII: HSTL Class 1 I/O with On-Chip 50- Termination on Inputs/Outputs
XGMII: Source Centered Timing
Supports Jumbo Packet (9600 byte maximum) Operation
Align Character Skew Support of 40 bit times at Chip Pins
MDIO: IEEE 802.3ae Clause 45 Compliant Management Data Input/Output Interface
1.2-V Core Voltage Supply, 1.5-V HSTL I/O Supply, and 2.5-V LVCMOS and Bias Supply
JTAG: IEEE 1149.1 Test Interface
Fabricated in Advanced 130-nm CMOS Technology
Package: Small Footprint 21x21mm, 400-Ball, Fine Pitch (1mm) PBGA

TLK3118