TUSB3200PAH Datasheet

Universal Serial Bus (USB)
- USB Specification version 1.1 compatible
- USB Audio Class Specification 1.0 compatible
- Integrated USB transceiver
- Supports 12 Mb/s data rate (full speed)
- Supports suspend/resume and remote wake-up
- Supports control, interrupt, bulk and isochronous data transfer types
- Supports up to a total of 7 in endpoints and 7 out endpoints in addition to the control endpoint
- Data transfer type, data buffer size, single or double buffering is programmable for each Endpoint
- On-Chip adaptive clock generator (ACG) supports asynchronous, synchronous and adaptive synchronization modes for isochronous endpoints
- To support synchronization for streaming USB audio data, the ACG can be used to generate the master clock for the CODEC
Micro-Controller Unit (MCU)
- Standard 8052 8-bit core
- 4K Bytes of program memory ROM that contains a boot loader program that loads the application firmware from external EEPROM
- 8K Bytes of program memory RAM which is loaded by the boot loader program
- 256 Bytes of internal data memory RAM
- Two GPIO ports
- MCU handles all USB control, interrupt and bulk endpoint transfers
DMA Controller
- Four DMA channels to support streaming USB audio data to/from the CODEC Port Interface
- Each channel can support a single USB isochronous endpoint
- For I 2 S modes, either a single or multiple USB isochronous endpoints can be used to support multiple DACs/ADCs
CODEC Port Interface
- Configurable to support AC?97 1.X, AC?97 2.X or I²S serial interface formats
- I²S modes can support a combination of up to 4 DACs and/or 3 ADCs
- Can be configured as a general-purpose serial interface
I²C Interface
- Master only interface
- Does not support a multimaster bus environment
- Programmable to 100 kbit/s or 400 kbit/s da

TUSB3200PAH

TUSB3200PAH Description

TUSB3200PAH Categories

TUSB3200PAH Manufacturer

TUSB3200PAH Datasheet (PDF)

TUSB3200PAH Price & Availability

TUSB3200PAH Features

TUSB3200PAH Parameters

Products Similar to TUSB3200PAH