Catalog Categories Part Numbers Manufacturers Search

TUSB6250PFC

TUSB6250PFC Description

TUSB6250PFC Description

TUSB6250PFC Description

TUSB6250PFC Categories

TUSB6250PFC Manufacturer

TUSB6250PFC Datasheet (PDF)

TUSB6250PFC Price & Availability


Check TUSB6250PFC Price & Availability at Canics

TUSB6250PFC Features

  • Universal Serial Bus (USB)
    • Fully compliant with USB 2.0 specification
    • Integrated USB 2.0 UTMI compliant transceiver (PHY)
    • Supports USB high speed (HS, 480 Mbits/sec) and full speed (FS, 12 Mbits/sec)
    • Supports USB suspend/resume and remote wake-up operation
    • Supports USB device unique serial number by using on-chip unique die-id.
    • Supports eight configurable endpoints (four input and four output) with a user-programmable buffer size, in addition to the default control endpoint (endpoint 0):
      • Each endpoint can be configured for interrupt and bulk (double buffered) transfers.
      • All endpoints share the 4K byte data buffer implemented in the SPRAM (single port SRAM).
  • Microcontroller Unit (MCU)
    • Integrated 60-MHz 8051 microcontroller with two clocks per cycle (up to 30 MIPS)
    • Application code is loadable from either the USB host or the external EEPROM (via the I2C interface)
    • 8K bytes of ROM for the boot loader
    • 1152 bytes of RAM with multiple bank selectable capability for the internal data buffer (IDATA space)
    • 40K bytes of RAM, configurable for either code or data space, which provides flexibility to the end product application:
      • 32K byte code RAM with 8K byte sector buffer data space
      • 16K byte code RAM with 24K byte sector buffer data space
      • 8K byte code RAM with 32K byte sector buffer data space
    • Master I2C interface controller for external device accesses capable of 100 Kbits/sec or 400 Kbits/sec transfer speed.
    • Up to 13 GPIOs and three general-purpose open-drain outputs can be used for end product specific functions.
  • ATA/ATAPI Interface Controller
    • Supports USB mass storage device class specification bulk-only transfer protocol
    • Glueless interface to ATA and ATAPI drives with full ATA and ATAPI protocol support
    • High-performance DMA engine supports all PIO, multiword DMA, and UDM

TUSB6250PFC Parameters

Products Similar to TUSB6250PFC


 

Other Components
1-282853-2
LT3010MPMS8E-5#PBF
P-A12-B2RX-C7
MAX6956AAX+
EB51F3C30V-10.000M
Keywords
TUSB6250PFC Data Sheet TUSB6250PFC Spec TUSB6250PFC Application Notes TUSB6250PFC Distributor
TUSB6250PFC Circuit TUSB6250PFC Reference TUSB6250PFC PDF TUSB6250PFC RoHS