| ZL40166 Description |
| High Output Current, High Speed Dual Operational Amplifier |
| ZL40166 Vendor |
| Zarlink Semiconductor |
| ZL40166 Categories |
|
| ZL40166 Features |
- 18.8 Vpp differential output voltage, RL = 50 ohms
- 9.4 Vpp single-ended output voltage, RL = 25 ohms
- High Output Current
- +/- 200 mA at Vo = 9.4 Vpp, Vs = 12 V
- 85 dB SFDR (Spurious Free Dynamic Range) at 100 KHz, Vo = 2 Vpp, RL = 25 ohms
- 192 MHz 3 dB bandwidth (G=2)
- 240 V/µs slew rate
- 3.8 nV / √Hz: input noise voltage
- 2.7 pA / √Hz: input noise current
- Low supply current: 7 mA/amp
- Single-supply operation: 5 V to 12 V
- High ESD (Electro-Static Discharge) immunity
- 4 kV for Supply and Output pins
- Low differential gain and phase: 0.005% and -0.07 deg
|
| ZL40166 Applications |
- ADSL PCI modem cards
- xDSL external modem
- Line Driver
|
| ZL40166 Description |
The ZL40166 is a low cost voltage feedback opamp capable of driving signals to within 1 V of the power supply rails. It features low noise and low distortion accompanied by a high output current which makes it ideally suited for the application as an xDSL line driver. The dual opamp can be connected as a differential line driver delivering signals up to 18.8 Vpp swing into a 25 ohms load, fully supporting the peak upstream power levels for upstream full-rate ADSL (Asymmetrical Digital Subscriber Line).
The wide bandwidth, high power output and low differential gain and phase figures make the ZL40166 ideally suited for a wide variety of video driver applications. |
| ZL40166 Datasheet and Application Notes |
|